M1 Class Individual Finely Turned Slotted Brass Calibration Test Weights
These M1 Class test weights are constructed from cylindrical finely turned brass and comply with OIML R111-2004 in all aspects, without exception. Slotted test weights can be slotted onto hanging beam bar weights in order to test force measurement devices in Newtons.
Correctly selected test weights with calibration certificate are the pre-requisite for ensuring that your balances and scales are not only correctly adjusted, but also correctly calibrated. Scheduled testing of your balances with such test weights helps to guarantee your quality requirements and to maintain your quality targets.
Here's how you find the right test weight for your balance: A balance can never be more accurate than the test weight used to adjust it, it all depends on its tolerance. Accuracy of the test weight, should correspond to the readout of the balance, or rather be better.
|347-415 M1 Class 1g Slotted Test Weight||1g||Show|
|347-425 M1 Class 2g Slotted Test Weights||2g||Show|
|347-435 M1 Class 5g Slotted Test Weights||5g||Show|
|347-445 M1 Class 10g Slotted Test Weight||10g||Show|
|347-455 M1 Class 20g Slotted Test Weight||20g||Show|
|347-465 M1 Class 50g Slotted Test Weight||50g||Show|
|347-475 M1 Class 100g Slotted Test Weight||100g||Show|
|347-485 M1 Class 200g Slotted Test Weight||200g||Show|
|347-495 M1 Class 500g Slotted Test Weight||500g||Show|
|347-515 M1 Class 1kg Slotted Test Weight||1000g||Show|
|347-525 M1 Class 2kg Slotted Test Weights||2000g||Show|
|347-535 M1 Class 5kg Slotted Test Weight||5000g||Show|
|347-545 M1 Class 10kg Slotted Test Weight||10000g||Show|